» Eğitim Durumu

» Akademik Unvanlar

» Yayınlar

SCI-SSCI, SCI Expanded ve AHCI Kapsamındaki Yayınları

  • MISIRLI CENK, CEVIZ MEHMET, ÇETINTAV ISIK, KILIÇ HALIL, Effect of high temperatures on dry sliding friction and wear behaviour of CuCrZr copper alloy, Walter de Gruyter GmbH, vol. 65, no. 2, 2023
  • KILIÇ HALIL, MISIRLI CENK, MUTLU IBRAHIM, TIMUR MUSTAFA, Mechanical and tribological properties of a WC-based HVOF spray coated brake disc, Materials Testing, vol. 64, 2022
  • ÇETINTAV ISIK, MISIRLI CENK, ÇAN YILMAZ, Determination of the Change in Electrical Conductivity of Single, Bimetallic and Trimetallic Cylindrical Billets with Plastic Deformation Induced by Upsetting Process, Tehnicki vjesnik - Technical Gazette, vol. 29, 2022
  • CEVIZ MEHMET, MISIRLI CENK, KARABEYOGLU SENCER SÜREYYA, An Investigation on Thermal Dry Sliding Wear Performance of Wrought AA 7075-T6, Transactions of the Indian Institute of Metals, vol. 75, 2022
  • KILIÇ HALIL, MISIRLI CENK, RESEARCH ON TRIBOLOGICAL BEHAVIOR OF Cr3C2-25NiCr-COATED BRAKE DISC, Surface Review and Letters, vol. 28, 2021
  • KILIÇ HALIL, MISIRLI CENK, MUTLU IBRAHIM, Investigation of the friction behavior of plasma spray Mo/NiCrBSi coated brake discs, Materials Testing, vol. 63, 2021
  • CEVIZ MEHMET, MISIRLI CENK, KARABEYOGLU SENCER SÜREYYA, The Effect of Temperature on Wear Performance of High-Velocity Oxy-Fuel Sprayed WC-10Co-4Cr Coating on AA7075-T6 Substrate, Journal of Materials Engineering and Performance, vol. 31, 2021
  • KILIÇ HALIL,MISIRLI CENK, Investigation of tribological behavior of 20NiCrBSi-WC12Co coated brake disc by HVOF method, Materials Research Express, vol. 7, no. 1, pp. 16560, 2020
  • SAHIN MÜMIN,MISIRLI CENK,SELVI SELÇUK, OPTIMIZATION OF THE PROCESS PARAMETERS OFFRICTION-WELDED St-Al JOINTS, MATERIALI IN TEHNOLOGIJE / MATERIALS AND TECHNOLOGY, vol. 53, no. 2, pp. 207-213, 2019
  • SAHIN MÜMIN,MISIRLI CENK,ÇETINARSLAN CEM SECAATTIN,Güler Can,Eisazadeh Hamid, Properties of Al/SiC metal matrix composites, Materials Testing, vol. 60, no. 6, pp. 647-652, 2018
  • SAHIN MÜMIN,MISIRLI CENK,ARAS MUSTAFA, Characteristic and Magnetic Properties ofNi1 xZnxFe2O4 Ferrites, Materialwissenschaft und Werkstofftechnik/Materials Science andEngineering Technology, vol. 47, no. 1, pp. 53-63, 2016
  • MISIRLI CENK,SAHIN MÜMIN,YILDIRIM BAHADIR, Properties Analysis of The Spray Nozzles in Drying Plant, Journal of the Balkan Tribological Association, vol. 21, no. 3, pp. 469-484, 2015
  • SAHIN MÜMIN,MISIRLI CENK,ÖZKAN DERVIS, Characteristic properties of AlTiN and TiN coated HSS materials, Industrial Lubrication and Tribology, vol. 67, no. 2, pp. 172-180, 2015
  • MISIRLI CENK, Homogenisation and Micro Arc Oxidation Coating Process on AZ91 Mg Alloy, Journal of the Balkan Tribological Association, vol. 20, no. 4, pp. 590-598, 2014
  • MISIRLI CENK, On materials flow using different lubricants in upsetting process, Industrial Lubrication and Tribology, vol. 66, no. 5, pp. 623-631, 2014
  • SAHIN MÜMIN, ÇETINARSLAN CEM SECAATTIN, MISIRLI CENK, Materials flow for different lubricants during cold forming, Emerald, vol. 65, no. 5, 2013
  • SAHIN MÜMIN,DINÇ MURAT,MISIRLI CENK, Mechanical and metallurgical properties of AlTiN coated HSS materials, Industrial Lubrication and Tribology, vol. 65, no. 6, pp. 418-424, 2013
  • SAHIN MÜMIN,ÇIL ENDER,MISIRLI CENK, Characterization of Properties in Friction Welded Stainless Steel and Copper Materials, Journal of Materials Engineering and Performance, vol. 22, no. 3, pp. 840-847, 2013
  • SAHIN MÜMIN,BALASUBRAMANIAN NARASIMHAN,MISIRLI CENK,AKATA HÜSEYIN EROL,ÇAN YILMAZ,ÖZEL KAAN, On properties at interfaces of friction welded near nanostructured Al 5083 alloys, The International Journal of Advanced Manufacturing Technology, vol. 61, no. 9-12, pp. 935-943, 2012
  • SEZEK SINAN,MISIRLI CENK,AKSAKAL BÜNYAMIN,ÇAN YILMAZ, The Effects of Square and Circular Die Orifices on the Performance of Combined Extrusion Forging Process, Journal of Materials Engineering and Performance, vol. 21, no. 4, pp. 500-507, 2012
  • MISIRLI CENK,SAHIN MÜMIN,DINÇ MURAT, Fatigue properties of ALTiN and TiN coated high speed steels HSS steels, Scientific Research and Essays, vol. 6, no. 15, pp. 3200-3204, 2011
  • ÇAN YILMAZ,MISIRLI CENK, Analysis of spur gear forms with tapered tooth profile, Materials & Design, vol. 29, no. 4, pp. 829-838, 2008

Uluslararası Hakemli Dergilerde Yayınlanan Makaleler

  • MISIRLI CENK, CEVIZ MEHMET, ÇETINTAV ISIK, Ersoy Benhur, A STUDY ON THE PREVENTION OF SURFACE DEFECTS CAUSED BY LUBRICATION IN PRODUCT PRODUCTION FROM ZAMAK 3 BY INJECTION METHOD, Journal of the Technical University of Gabrovo, vol. 63, pp. 55-58, 2021
  • CEVIZ MEHMET, MISIRLI CENK, KARABEYOGLU SENCER SÜREYYA, AN INVESTIGATION ABOUT THE EFFECT OF LOAD ON DRY SLIDING WEAR PERFORMANCE OF AA7075-T6, Journal of the Technical University of Gabrovo, vol. 63, pp. 51-54, 2021
  • KILIÇ HALIL,MISIRLI CENK,MUTLU IBRAHIM, Investigating of Braking and Tribological Features of Granite Powder Additive Brake Linings, Journal of the Balkan Tribological Association, vol. 24, no. 1, pp. 52-63, 2018
  • MISIRLI CENK, ON PRODUCTION OF MAGNETIC MATERIAL SHAVING TiO1-xZnOxFe2O4, World Academy of Science, Engineering and TechnologyInternational Journal of Materials and Metallurgical Engineering, vol. 12, no. 8, pp. 380-383, 2018
  • MISIRLI CENK,ÇETINTAV ISIK,ÇAN YILMAZ,MISIRLI CEM, Numerical Analysis of bi-Metallic Parts Using a Finite Element Sotware, Journal of the Technical University –Sofia Plovdiv Branch, Bulgaria – Fundamental Sciences and Applications, vol. 23, pp. 129-135, 2017
  • MISIRLI CENK,SAHIN MÜMIN,ceviz mehmet, The Effects on Surface Roughness of Parameters in Machining, International Journal of Modern Manufacturing Technologies, vol. 9, no. 1, pp. 35-40, 2017
  • MISIRLI CENK,CEVIZ MEHMET,SAHIN MÜMIN, THE EFFECTS ON SURFACE ROUGHNESS OF PARAMETERS INMACHINING, International Journal of Modern Manufacturing Technologies, vol. 9, no. 1, pp. 35-40, 2017
  • ÇETINTAV ISIK,MISIRLI CENK,ÇAN YILMAZ, Upsetting of Tri Metallic St Cu Al andSt Cu60Zn Al Cylindrical Billets, World Academy of Science, Engineering and TechnologyInternational Journal of Mechanical, Aerospace, Industrial, Mechatronic and Manufacturing Engineering, vol. 10, no. 10, pp. 1632-1635, 2016
  • MISIRLI CENK,ÇETINTAV ISIK,ÇAN YILMAZ, EXPERIMENTAL AND FEM STUDY OF OPEN DIE FORGING FOR BIMETALLIC CYLINDRICAL PARTS PRODUCED USING DIFFERENT MATERIALS, International Journal of Modern Manufacturing Technologies, vol. 8, no. 1, pp. 69-74, 2016
  • MISIRLI CENK,BECENEN NILGÜN,SAHIN MÜMIN, An Investigation on Plastic Matrix Composite Materials, Applied Mechanics and Materials, vol. 555, pp. 406-412, 2014
  • SAHIN MÜMIN,MISIRLI CENK, Properties of Cold Pressure Welded Aluminium and Copper Sheets, Advanced Materials Research, vol. 463464, pp. 244-248, 2012
  • MISIRLI CENK,SAHIN MÜMIN,KUSÇU HILMI, Temperature Determination of St Al Joints During Friction Welding, Advanced Materials Research, vol. 463464, pp. 1538-1542, 2012
  • MISIRLI CENK,ERDOGAN ERTUGRUL SELÇUK,HÜNER ÜMIT, Prediction in CAE Programme with without Reinforced Plastic Production in Injection Molding Process, International Journal of Modern Manufacturing Technologies, vol. 3, no. 1, pp. 45-50, 2011
  • MISIRLI CENK,ÇAN YILMAZ, An Experimental Study and Designing by Using CAD CAE In Combined Open Die Forging Extrusion Process of Different Shaped Geometries from Aluminum Alloy Samples, International Journal of Modern Manufacturing Technologies, vol. 2, no. 1, pp. 55-60, 2011

Uluslararası Bilimsel Toplantılarda Sunulan ve Bildiri Kitabında Basılan Bildiriler (Proceedings)

  • CEVIZ MEHMET, MISIRLI CENK, KARABEYOGLU SENCER SÜREYYA, AN INVESTIGATION ABOUT THE EFFECT OF LOAD ON DRY SLIDING WEAR PERFORMANCE OF AA7075-T6, Unitech 2021
  • MISIRLI CENK, EXPERIMENTAL INVESTIGATION OF THE EFFECTS OFCOATING MATERIALS COATED BY USING PVD METHOD ONSURFACE ROUGHNESS IN MACHINING OF AISI 1040, SEVENTH INTERNATIONAL SCIENTIFIC CONFERENCE“ENGINEERING, TECHNOLOGIES AND SYSTEMS”
  • SAHIN MÜMIN,MISIRLI CENK,SELVI SELÇUK, Friction weld of AISI 304 stainless steel and pure copper materials, 17th Anniversary International Scientific Conference (UNITECH’17)
  • SAHIN MÜMIN,MISIRLI CENK,SELVI SELÇUK, Cutting Performance of Vapor Coated and Uncoated Drill Bits, International Scientific Conference - Unitech 2016 - Gabrovo
  • SELVI SELÇUK,SAHIN MÜMIN,MISIRLI CENK, Comparision of Coated and Uncoated Drill Bits in Terms of Tool Life and Cost, International Scientific Conference - Unitech 2016 - Gabrovo
  • MISIRLI CENK,ÇETINTAV ISIK,ÇAN YILMAZ, Design of a New Type of Solar Tracker Solar Panel System, International Scientific Conference - Unitech 2016 - Gabrovo
  • MISIRLI CEM,MISIRLI CENK, 5083 Aluminum Heat Treatment, "Fifth International Scientifict Conference" Engineering, Technologies and Systems - Techsys 2016
  • MISIRLI CENK,CEVIZ MEHMET, Investigation of the Effects of Cutting Tool Cutting Speed and Material Type on Surface Roughness, "Fifth International Scientifict Conference" Engineering, Technologies and Systems - Techsys 2016
  • MISIRLI CENK,ÇETINTAV ISIK,KESGIN Baris, Application and Optimization Sheet Metal Cutting and Forming Dies, 15th Anniversary International Scientific Conference (UNITECH’15), vol. 3, pp. 174-176
  • MISIRLI CENK,ÇETINTAV ISIK, Analysis of Bimetallic Cylindrical Components in Cold Upsetting Process, 14th Anniversary International Scientific Conference (UNITECH’14), vol. 2, pp. 157-160
  • SAHIN MÜMIN,MISIRLI CENK,ARAS MUSTAFA, On Production of Magnetic Materials Having NiO1 xZnOxFe2O4, Proc. of the Second Int. Conf. on Advances In Mechanical and Robotics Engineering- AMRE 2014, pp. 24-28
  • MISIRLI CENK,ÇAN YILMAZ, An Investigation of Upsetting of Bimetallic Metals, Modtech The 15th International Conference – New face of TMCR, pp. 693-696
  • MISIRLI CENK,SÖZER UFUK, A General Overwiev of the MAO Process on Aluminum Alloys, 10th Anniversary International Scientific Conference (UNITECH’10), pp. 128-130
  • SAHIN MÜMIN,MISIRLI CENK, Physical Vapour Decomposition Method, 10th Anniversary International Scientific Conference (UNITECH’10), pp. 143-147
  • MISIRLI CENK, Investigation on Fatigue Properties of Aluminum Alloys AA5083 Coated by the Means of Micro Arc Oxidation Process, 10th Anniversary International Scientific Conference (UNITECH’10), pp. 148-150
  • MISIRLI CENK,ÇAN YILMAZ, Forming of Plastic Block Composites as Gear like Components by Lateral Extrusion Fatigue Tests and Micro hardness Tests, 13th International Materials Symposium (IMSP’2010), pp. 1574-1581
  • MISIRLI CENK,ÇAN YILMAZ, A Comparative Study for Open Die Forging Extrusion Process of Clovered Shaped and Rectangular Shaped Aluminum Alloy, Modtech The 14th International Conference – New face of TMCR, pp. 309-402
  • SAHIN MÜMIN,MISIRLI CENK,SEVIL CEYHUN, Investigation on Fatigue Properties of Ion Nitriding Peocessed Parts Joined with Friction Welding, 13th International Materials Symposium (IMSP’2010), pp. 769-777
  • SAHIN MÜMIN,MISIRLI CENK, Properties of Cold Pressure Welded Aluminium and Copper Sheets, International Conference on Mechanical Enginering and Aerospace (ICMERA 2010), pp. 130-134
  • MISIRLI CENK,SAHIN MÜMIN,KUSÇU HILMI, Temperature Determination of St Al Joints During Friction Welding, International Conference on Mechanical Enginering and Aerospace (ICMERA 2010), pp. 125-129
  • MISIRLI CENK, The Effect of Homogenisation Treatment of the Al99 7 Hardness Tests and Tensile Tests, Proc. of UNITECH’09 International Scientific Conference
  • MISIRLI CENK,ÇAN YILMAZ, Microstructural Differences on the Open Die Forging Extrusion Process for Different Die Geometries, Proc. of UNITECH’09 International Scientific Conference
  • MISIRLI CENK,SÖZER UFUK, Silo Cleaning Methods Used in Industry their Efficiency and Comprasion, Proc. of 10th International Scientific Conference
  • MISIRLI CENK,ÇAN YILMAZ, The Fatigue Tests of Gear Like Forms with Tapered Tooth and Splines Elements, Proc. of 6th International Scientific Conference UNITECH’07, vol. 2, pp. 101-103
  • KUSÇU HILMI,MISIRLI CENK,AKATA HÜSEYIN EROL,ÇAN YILMAZ, Automatic Conrol Hardware for Hydraulic Pres, Proc. of 6th International Scientific Conference UNITECH’06
  • ÇAN YILMAZ,MISIRLI CENK, A New Concept in Metal Forming An Incremental Forming, 4th International Advanced Technologies Symposium
  • MISIRLI CENK,ALTINBALIK MUHAMMET MURAT TAHIR,ÇAN YILMAZ, Lateral Extrusion of Spline and Gear Like Forms, Proc. of 4th International Scientific Conference UNITECH’04
  • ÇAN YILMAZ,ALTINBALIK MUHAMMET MURAT TAHIR,MISIRLI CENK, An Investigation of the Early Stage of Open Die Forging Extrusion for Different Geometries, Proc. of 10th Int. Conference on Machine Design and Manufacturing Conference

Uluslararası Konferans ve Sempozyumlar

  • Investigation of Post Welding Distortions In Industrial Fixtures (Ekim 2022)

Yazılan Uluslararası Kitaplar veya Kitaplarda Bölümler

  • SAHIN MÜMIN,MISIRLI CENK, Advances in Engineering Research, Nova Science Publisher
  • MISIRLI CENK,SAHIN MÜMIN,SÖZER UFUK, Aluminium Alloys New Trends in Fabrications and Applications, Intech
  • SAHIN MÜMIN,MISIRLI CENK, Aluminium Alloys New Trends in Fabrications and Applications, Intech

Ulusal Hakemli Dergilerde Yayınlanan Makaleler

  • SAHIN MÜMIN,MISIRLI CENK,ÖZKAN DERVIS, Asiri Plastik Deformasyonun Alüminyum Alasimlarinin Kaynagi Üzerine Etkisi, Mühendislik, vol. 53, no. 630, pp. 26-33, 2012

Ulusal Bilimsel Toplantılarda Sunulan ve Bildiri Kitabında Basılan Bildiriler

  • SAHIN MÜMIN,MISIRLI CENK,ÖZKAN DERVIS, Asiri Plastik Deformasyonun Alüminyum Alasimlarinin Kaynagi Üzerine Etkisi, TMMOB Makine Mühendisleri Odasi Gelecegin Teknolojileri Sempozyumu ve Sergisi, pp. 225-235
  • MISIRLI CENK,ÇAN YILMAZ,ALTINBALIK MUHAMMET MURAT TAHIR, Ekstrüzyon Tipi Dövme Prosesi Üzerine Teorik Bir Çalisma, II. Mühendislik Bilimleri Genç Arastirmacilar Kongresi (MBGAK 2005)

Projeler

  • Plazma Elektrolitik Oksitlenme Yöntemi Uygulanarak, Yüzey Özellikleri Degistirilmis Farkli Bilesimlere Sahip Toz Metalurjisine Ugramis Alüminyum Malzemelerin, Sürtünme Karistirma Kaynagindaki Deneysel Performanslarinin Incelenmesi, TRAKYA ÜNIVERSITESI, 2017-2017
  • Yigma Prosesinde Kullanilan Farkli Yaglayicilarin Bi-Metalik Malzemelerin Malzeme Akisina Etkisi, TRAKYA ÜNIVERSITESI, 2016-2016
  • Tornalama Isleminde Kesici Uç Kaplama Çesidinin Is Parçasi Yüzey Kalitesi ve Takim Ömrüne Etkisinin Arastirilmasi Deneysel Verilerin Elde Edilmesi, TRAKYA ÜNIVERSITESI, 2016-2016
  • Plastik Enjeksiyon Yöntemi ile Üretilen Alüminyum Tozu Takviyeli Plastik Esasli Kompozit Parçalarin Yüzey Özelliklerinin Mikro ark Oksidasyonu Yöntemi ile Gelistirilmesi, TRAKYA ÜNIVERSITESI, 2016-2016
  • Performans Puani Degerlendirme Destek Projesi, TRAKYA ÜNIVERSITESI, 2015-2015
  • Kesici Takim Kesme Hizi ve Malzeme Cinsinin Yüzey Pürüzlülügüne Etkilerinin Arastirilmasi, TRAKYA ÜNIVERSITESI, 2015-2015
  • SinterlenmisAlüminyum Malzemelerin Sürtünme Karistirma Kaynagi Olabilirligi ve Mekanik Özelliklerinin Testleri, TRAKYA ÜNIVERSITESI, 2014-2014
  • Sac Metal Kaliplarinin Optimizasyonu ve Uygulamasi, TRAKYA ÜNIVERSITESI, 2014-2014
  • Kuru Tip Ceviz Kavlama Yesil Dis Kabuk Soyma Makinesi Tasarim ve Imalati, TRAKYA ÜNIVERSITESI, 2013-2013
  • GÜB ÇEL Pelet Makinasi Gelistirilmesi, TRAKYA ÜNIVERSITESI, 2012-2012
  • Mühendislik Malzemelerinin Mekanik Özelliklerinin Incelenmesi, TRAKYA ÜNIVERSITESI, 2012-2012
  • Mühendislik Malzemelerinin Demir Esasli ve Demir Disi Malzemeler Kompozit Malzemeler Polimer Malzemeler Seramik Malzemeler Metalurjik Özelliklerinin Incelenmesi, TRAKYA ÜNIVERSITESI, 2012-2012
  • Sürtünme Kaynagiyla Birlestirilmis Çeliklerin Mekanik ve Metalurjik Özelliklerin Incelenmesi, TRAKYA ÜNIVERSITESI, 2012-2012
  • Bilgisayar Otomasyonu Kullanilarak Düz Disli Konik Disli ve Sonsuz Vida Disli Mekanizmalarinin Analizinin Yapilarak Imal Edilmesi, TRAKYA ÜNIVERSITESI, 2012-2012
  • Farkli Kalip Geometrileri Dizayn Edilerek Plastik Enjeksiyon Yöntemi ile Üretilen Malzemelerin Mekanik Özelliklerinin Arastirilmasi, TRAKYA ÜNIVERSITESI, 2012-2012
  • Yüksek basinç ile gidalarin pastörizasyonu, TRAKYA ÜNIVERSITESI, 2011-2011
  • Farkli Malzemeler Kullanilarak Üretilmis Bimetalik Parçalarin Sürtünme Kaynaginda Birlestirilerek Analizlerinin Yapilmasi, TRAKYA ÜNIVERSITESI, 2011-2011
  • Ekstrüzyon Tipi Dövme Proseslerinde Farkli Malzemeler ve Farkli Kaliplar Kullanilarak Yeni Ürünlerin Elde Edilmesi Bu Yeni Ürünlerin Mekanik Özelliklerinin Incelenmesi, TRAKYA ÜNIVERSITESI, 2011-2011
  • Farkli Çeliklerin Yorulma Asinmasinda Malzeme Sertliginin Asinma Üzerine Etkisi, TRAKYA ÜNIVERSITESI, 2011-2011
  • Ni1 xZnxFe2O4 Yapisindaki Miknatislarin Toz Metalurjisi Yöntemiyle Üretimi ve Manyetik Özelliklerinin Incelenmesi, TRAKYA ÜNIVERSITESI, 2011-2011
  • Kakao Püskürtme Tesisindeki Kakao Püskürtme Memelerinin Tribolojik Olarak Incelenmesi, TRAKYA ÜNIVERSITESI, 2011-2011
  • Farkli Malzemelerin Sürtünme Kaynaginda Sicakligin Deneysel Olarak Ölçümü, TRAKYA ÜNIVERSITESI, 2010-2010
  • Önceden Hazirlanmis Plastik Blok Kompozitlerin Makine Elemani Üretiminde Sekil Verme Kabiliyetlerinin Incelenmesi ve Numunelerin Imalati, TRAKYA ÜNIVERSITESI, 2010-2010
  • AA2014 Al Alasiminin Plazma Elektrolitik Oksitlenme Yöntemiyle Yüzey Özelliklerinin Gelistirilmesi ve Yorulma Davranisinin Incelenmesi, TRAKYA ÜNIVERSITESI, 2010-2010
  • Pnömatik Sistem Kullanilarak Gidalarin Ezilip Yogurulup Karistirilmasini Saglayan Makinanin Tasarlanip Üretiminin Yapilmasi, TRAKYA ÜNIVERSITESI, 2008-2008
  • Yanal Ekstrüzyonla Disli Benzeri Parçalarin Imalati Analiz ve Deneyler, TRAKYA ÜNIVERSITESI, 2005-2005

Ödüller

  • 3. AR-GE INOVASYON YARISMASI, 2019, TRAKYA KALKINMA AJANSI
  • YAYIN TESVIK ÖDÜLÜ, 2014, TÜBITAK
  • YAYIN TESVIK ÖDÜLÜ, 2014, TÜBITAK
  • YAYIN TESVIK ÖDÜLÜ, 2012, TÜBITAK
  • YAYIN TESVIK ÖDÜLÜ, 2008, TÜBITAK

Diğer

  • CENK MISIRLI, YAYLI VE KAVRAMALI KURU TIP CEVIZ KAVLAMA MAKINASI, 2018