» Biyografi

1970 yılında Muratlı-Tekirdağ'da doğdu. İlk, orta ve lise öğrenimini Tekirdağ ve Kırklareli'de tamamladı. 1995’te Trakya Üniversitesi Mühendislik Fakültesi Makine Mühendisliği Bölümünden mezun oldu. Aynı yıl Trakya Üniversitesi Mühendislik Fakültesinde Araştırma Görevlisi olarak çalışmaya başladı. 1997 yılında yüksek lisansı ve 2003 yılında doktorasını tamamladı. Aynı yıl Trakya Üniversitesi Mühendislik Fakültesi Makine Mühendisliği Bölümü Mekanik Anabilim Dalına yardımcı doçent olarak atandı. 2008’de doçent, 2013’te profesör ünvanını aldı.  SCI kapsamındaki dergilerde 46 adet makalesi bulunmaktadır ve bu yayınlara yine SCI kapsamında 2017 Nisan  ayı itibariyla 1650'e yakın atıf yapılmıştır. Aynı veri tabanında h-indeksi 22'dir. Evli ve iki çocuk babasıdır.

» Eğitim Durumu

» Akademik Unvanlar

» Akademik ve İdari Görevler

» Yayınlar

SCI-SSCI veya SCI Expanded Kapsamındaki Yayınları

  • Torsional vibration analysis of double walled carbon nanotubes using nonlocal elasticity Metin Aydogdu, mustafa Arda (Mart 2016)
  • Vibration analysis of symmetric laminated composite plates with attached mass (Ocak 2016)
  • ARDA, M., AYDOGDU, M., "Torsional wave propagation in multiwalled carbon nanotubes using nonlocal elasticity", Applied Physics A Materials Science & Processing, Volume:122, Issue:3, Page:219, 2016. DOI: 10.1007/s00339-016-9751-1 (Mart 2016)
  • A nonlocal rod model for axial vibration of double-walled carbon nanotubes including axial van der Waals force effects (Aralık 2015)
  • Flapwise vibration of rotating composite beams (Aralık 2015)
  • Wave propagation analysis of embedded (coupled) functionally graded nanotubes conveying fluid By: Filiz, Seckin; Aydogdu, Metin COMPOSITE STRUCTURES Volume: 132 Pages: 1260-1273 Published: NOV 15 2015 (Kasım 2015)
  • Torsional statics and dynamics of nanotubes embedded in an elastic medium M Arda, M Aydogdu Composite Structures 114, 80-91 (Temmuz 2014)
  • On the vibration of nanorods restrained by a linear spring in-spanOriginal Research Article Mechanics Research Communications, Volume 57, April 2014, Pages 90-96 Metin Aydogdu, Isaac Elishakoff (Haziran 2014)
  • Longitudinal wave propagation in multiwalled carbon nanotubes Original Research Article Composite Structures, Volume 107, January 2014, Pages 578-584 Metin Aydogdu (Ocak 2014)
  • A note on semi-inverse method for buckling of axially functionally graded beams Author(s): Aydogdu, Metin; Maroti, Gyoergy; Elishakoff, IsaacSource: JOURNAL OF REINFORCED PLASTICS AND COMPOSITES Volume: 32 Issue: 7 Pages: 511-512 DOI: 10.1177/0731684412474999 Published: APR 2013 Times Cited: 0 (from Web of Science)
  • Three dimensional mechanical buckling of FG plates with general boundary conditions Author(s): Uymaz, B.; Aydogdu, M.Source: COMPOSITE STRUCTURES Volume: 96 Pages: 174-193 DOI: 10.1016/j.compstruct.2012.07.033 Published: FEB 2013 Times Cited: 0 (from Web of Science)
  • Three dimensional shear buckling of FG plates with various boundary conditions Author(s): Uymaz, B.; Aydogdu, M.Source: COMPOSITE STRUCTURES Volume: 96 Pages: 670-682 DOI: 10.1016/j.compstruct.2012.08.031 Published: FEB 2013 Times Cited: 0 (from Web of Science)
  • Axial vibration analysis of nanorods (carbon nanotubes) embedded in an elastic medium using nonlocal elasticity Author(s): Aydogdu, MetinSource: MECHANICS RESEARCH COMMUNICATIONS Volume: 43 Pages: 34-40 DOI: 10.1016/j.mechrescom.2012.02.001 Published: JUL 2012 Times Cited: 1 (from Web of Science) (first place in the most cited papers in the last five years).
  • Longitudinal wave propagation in nanorods using a general nonlocal unimodal rod theory and calibration of nonlocal parameter with lattice dynamics Author(s): Aydogdu, MetinSource: INTERNATIONAL JOURNAL OF ENGINEERING SCIENCE Volume: 56 Pages: 17-28 DOI: 10.1016/j.ijengsci.2012.02.004 Published: JUL 2012 Times Cited: 0 (from Web of Science)
  • Forced transverse vibration of nanoplates using nonlocal elasticity Author(s): Aksencer, Tolga; Aydogdu, MetinSource: PHYSICA E-LOW-DIMENSIONAL SYSTEMS & NANOSTRUCTURES Volume: 44 Issue: 7-8 Pages: 1752-1759 DOI: 10.1016/j.physe.2011.12.004 Published: APR-MAY 2012 Times Cited: 2 (from Web of Science)
  • Vibration analyses of FGM plates with in-plane material inhomogeneity by Ritz method Author(s): Uymaz, Bahar; Aydogdu, Metin; Filiz, SeckinSource: COMPOSITE STRUCTURES Volume: 94 Issue: 4 Pages: 1398-1405 DOI: 10.1016/j.compstruct.2011.11.002 Published: MAR 2012 Times Cited: 4 (from Web of Science)
  • Modeling carbon nanotube-based mass sensors using axial vibration and nonlocal elasticity Author(s): Aydogdu, Metin; Filiz, SeckinSource: PHYSICA E-LOW-DIMENSIONAL SYSTEMS & NANOSTRUCTURES Volume: 43 Issue: 6 Pages: 1229-1234 DOI: 10.1016/j.physe.2011.02.006 Published: APR 2011 Times Cited: 18 (from Web of Science)
  • Levy type solution method for vibration and buckling of nanoplates using nonlocal elasticity theory Author(s): Aksencer, Tolga; Aydogdu, MetinSource: PHYSICA E-LOW-DIMENSIONAL SYSTEMS & NANOSTRUCTURES Volume: 43 Issue: 4 Pages: 954-959 DOI: 10.1016/j.physe.2010.11.024 Published: FEB 2011 Times Cited: 19 (from Web of Science) (in the most cited papers list).
  • Axial vibration of carbon nanotube heterojunctions using nonlocal elasticity Author(s): Filiz, Seckin; Aydogdu, MetinSource: COMPUTATIONAL MATERIALS SCIENCE Volume: 49 Issue: 3 Pages: 619-627 DOI: 10.1016/j.commatsci.2010.06.003 Published: SEP 2010 Times Cited: 26 (from Web of Science)
  • On the forced vibration of carbon nanotubes via a non-local Euler-Bernoulli beam model Author(s): Karaoglu, P.; Aydogdu, M.Source: PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE Volume: 224 Issue: C2 Pages: 497-503 DOI: 10.1243/09544062JMES1707 Published: 2010 Times Cited: 6 (from Web of Science) (Collection of the most highly cited papers contributing to the 2012 impact factor. (9/10).)
  • A general nonlocal beam theory: Its application to nanobeam bending, buckling and vibration Author(s): Aydogdu, MetinSource: PHYSICA E-LOW-DIMENSIONAL SYSTEMS & NANOSTRUCTURES Volume: 41 Issue: 9 Pages: 1651-1655 DOI: 10.1016/j.physe.2009.05.014 Published: SEP 2009 Times Cited: 65 (from Web of Science) (second place in the most cited papers in the last five years).
  • A new shear deformation theory for laminated composite plates Author(s): Aydogdu, MetinSource: COMPOSITE STRUCTURES Volume: 89 Issue: 1 Pages: 94-101 DOI: 10.1016/j.compstruct.2008.07.008 Published: JUN 2009 Times Cited: 31 (from Web of Science)
  • Vibration Analysis of Inclusion Reinforced Composite Square Plates under Various Boundary Conditions Author(s): Eruslu, S. Ozmen; Aydogdu, MetinSource: JOURNAL OF REINFORCED PLASTICS AND COMPOSITES Volume: 28 Issue: 8 Pages: 995-1012 DOI: 10.1177/0731684407087741 Published: APR 2009 Times Cited: 0 (from Web of Science)
  • Axial vibration of the nanorods with the nonlocal continuum rod model Author(s): Aydogdu, MetinSource: PHYSICA E-LOW-DIMENSIONAL SYSTEMS & NANOSTRUCTURES Volume: 41 Issue: 5 Pages: 861-864 DOI: 10.1016/j.physe.2009.01.007 Published: MAR 2009 Times Cited: 80 (from Web of Science)
  • Effects of shear deformation on vibration of doublewalled carbon nanotubes embedded in an elastic medium Author(s): Aydogdu, MetinSource: ARCHIVE OF APPLIED MECHANICS Volume: 78 Issue: 9 Pages: 711-723 DOI: 10.1007/s00419-007-0189-y Published: SEP 2008 Times Cited: 25 (from Web of Science)
  • Semi-inverse method for vibration and buckling of axially functionally graded beams Author(s): Aydogdu, MetinSource: JOURNAL OF REINFORCED PLASTICS AND COMPOSITES Volume: 27 Issue: 7 Pages: 683-691 DOI: 10.1177/0731684407081369 Published: MAY 2008 Times Cited: 19 (from Web of Science)
  • Vibration of multi-walled carbon nanotubes by generalized shear deformation theory Author(s): Aydogdu, MetinSource: INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES Volume: 50 Issue: 4 Pages: 837-844 DOI: 10.1016/j.ijmecsci.2007.10.003 Published: APR 2008 Times Cited: 40 (from Web of Science)
  • Free vibrations of antisymmetric angle-ply laminated thin square composite plates Author(s): Aydogdu, Metin; Timarci, TanerSource: JOURNAL OF ADVANCED MATERIALS Volume: 40 Issue: 2 Pages: 57-64 Published: APR 2008 Times Cited: 0 (from Web of Science)
  • Conditions for functionally graded plates to remain flat under in-plane loads by classical plate theory Author(s): Aydogdu, MetinSource: COMPOSITE STRUCTURES Volume: 82 Issue: 1 Pages: 155-157 DOI: 10.1016/j.compstruct.2006.10.004 Published: JAN 2008 Times Cited: 11 (from Web of Science)
  • Three-dimensional vibration analyses of functionally graded plates under various boundary conditions Author(s): Uymaz, Bahar; Aydogdu, MetinSource: JOURNAL OF REINFORCED PLASTICS AND COMPOSITES Volume: 26 Issue: 18 Pages: 1847-1863 DOI: 10.1177/0731684407081351 Published: DEC 2007 Times Cited: 11 (from Web of Science)
  • Nonlocal elasticity effect on vibration of in-plane loaded double-walled carbon nano-tubes Author(s): Ece, M. C.; Aydogdu, M.Source: ACTA MECHANICA Volume: 190 Issue: 1-4 Pages: 185-195 DOI: 10.1007/s00707-006-0417-5 Published: MAY 2007 Times Cited: 49 (from Web of Science)
  • Thermal buckling analysis of cross-ply laminated composite beams with general boundary conditions Author(s): Aydogdu, MetinSource: COMPOSITES SCIENCE AND TECHNOLOGY Volume: 67 Issue: 6 Pages: 1096-1104 DOI: 10.1016/j.compscitech.2006.05.021 Published: MAY 2007 Times Cited: 15 (from Web of Science)
  • Free vibration analysis of functionally graded beams with simply supported edges Author(s): Aydogdu, Metin; Taskin, VedatSource: MATERIALS & DESIGN Volume: 28 Issue: 5 Pages: 1651-1656 DOI: 10.1016/j.matdes.2006.02.007 Published: 2007 Times Cited: 74 (from Web of Science) ( in the most cited papers list). )
  • Vibration of a variable cross-section beam Author(s): Ece, Mehmet Cem; Aydogdu, Metin; Taskin, VedatSource: MECHANICS RESEARCH COMMUNICATIONS Volume: 34 Issue: 1 Pages: 78-84 DOI: 10.1016/j.mechrescom.2006.06.005 Published: JAN-FEB 2007 Times Cited: 13 (from Web of Science)
  • Comparison of various shear deformation theories for bending, buckling, and vibration of rectangular symmetric cross-ply plate with simply supported edges Author(s): Aydogdu, MetinSource: JOURNAL OF COMPOSITE MATERIALS Volume: 40 Issue: 23 Pages: 2143-2155 DOI: 10.1177/0021998306062313 Published: DEC 2006 Times Cited: 13 (from Web of Science)
  • Buckling analysis of cross-ply laminated beams with general boundary conditions by Ritz method ,Aydogdu, M,Source: COMPOSITES SCIENCE AND TECHNOLOGY Volume: 66 Issue: 10 Pages: 1248-1255 DOI: 10.1016/j.compscitech.2005.10.029 Published: AUG 2006 ,Times Cited: 13 (from Web of Science).
  • Buckling and vibration of non-ideal simply supported rectangular isotropic platesAuthor(s): Aydogdu, M; Ece, MCSource: MECHANICS RESEARCH COMMUNICATIONS Volume: 33 Issue: 4 Pages: 532-540 DOI: 10.1016/j.mechrescom.2005.08.002 Published: JUL-AUG 2006Times Cited: 6 (from Web of Science)
  • Free vibration analysis of angle-ply laminated beams with general boundary conditionsAuthor(s): Aydogdu, MetinSource: JOURNAL OF REINFORCED PLASTICS AND COMPOSITES Volume: 25 Issue: 15 Pages: 1571-1583 DOI: 10.1177/0731684406066752 Published: 2006Times Cited: 10 (from Web of Science)
  • 3)Vibration analysis of cross-ply laminated beams with general boundary conditions by Ritz methodAuthor(s): Aydogdu, MSource: INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES Volume: 47 Issue: 11 Pages: 1740-1755 DOI: 10.1016/j.ijmecsci.2005.06.010 Published: NOV 2005Times Cited: 28 (from Web of Science) (in the most cited papers list) (Ocak 2005)
  • 2)Buckling of symmetric cross-ply square plates with various boundary conditionsAuthor(s): Timarci, T; Aydogdu, MSource: COMPOSITE STRUCTURES Volume: 68 Issue: 4 Pages: 381-389 DOI: 10.1016/j.compstruct.2004.04.003 Published: MAY 2005Times Cited: 11 (from Web of Science) (Ocak 2005)
  • 1) Vibration analysis of cross-ply laminated square plates with general boundary conditionsAuthor(s): Aydogdu, M; Timarci, TSource: COMPOSITES SCIENCE AND TECHNOLOGY Volume: 63 Issue: 7 Pages: 1061-1070 DOI: 10.1016/S0266-3538(03)00016-2 Published: MAY 2003Times Cited: 21 (from Web of Science) (Ocak 2003)

Uluslararası Hakemli Dergilerde Yayınlanan Makaleler

  • ARDA, M., AYDOGDU, M. "Longitudinal Vibration of CNTs Viscously Damped in Span", International Journal of Engineering & Applied Sciences (IJEAS), Volume:9, Issue:2, Page:22-38, 2017. DOI: 10.24107/ijeas.305348 (Nisan 2017)
  • AYDOGDU, M.; ARDA, M., "Forced vibration of nanorods using nonlocal elasticity", Advances in Nano Research, Vol: 4, No: 4, Page: 265-279, 2016. DOI: 10.12989/anr.2016.4.4.265 (Aralık 2016)
  • ARDA, M., AYDOGDU, M. "Bending of CNTs Under The Partial Uniform Load", International Journal of Engineering & Applied Sciences (IJEAS), Volume:8, Issue:2, Page:21-29, 2016. DOI: 10.24107/ijeas.252142 (Eylül 2016)
  • ARDA, M., AYDOGDU, M. "ANALYSIS OF FREE TORSIONAL VIBRATION IN CARBON NANOTUBES EMBEDDED IN A VISCOELASTIC MEDIUM", Advances in Science and Technology Research Journal, Volume:9, Issue:26, Page:28-33, 2015. DOI: 10.12913/22998624/2361 (Mayıs 2015)
  • Aydogdu M., Thermal Buckling of Composite Beams , Encyclopedia of Thermal Stresses, Springer, 2014.

Uluslararası Bilimsel Toplantılarda Sunulan ve Bildiri Kitabında Basılan Bildiriler (Proceedings)

  • ARDA, M., AYDOGDU, M. "ARDA, M., AYDOGDU, M. "ANALYSIS OF FREE TORSIONAL VIBRATION IN CARBON NANOTUBES EMBEDDED IN A VISCOELASTIC MEDIUM", 6th International Advance in Manufacturing and Machine Designing Symposium (MSN2015), 20-22 May 2015, Naleczow/POLAND. (Mayıs 2015)
  • ARDA, M., AYDOGDU, M., "TORSIONAL WAVE PROPAGATION IN MULTIWALLED CARBON NANOTUBES USING NONLOCAL ELASTICITY", International Conference on Advances in Composite Materials and Structures (CACMS2015), 13-15 April 2015, Istanbul. (Nisan 2015)
  • Metin Aydogdu and Mustafa Arda . Forced vibration of nanorods using nonlocal elasticity, International Conference on advances in composite materials and structures, (CACMS 2015) 13-15 April 2015, (ITU) Istanbul.
  • Uymaz B., Aydogdu M.,TEMPERATURE DEPENDENT BUCKLING ANALYSIS OF FUNCTIONALLY GRADED PLATES. ICCS 17, Porto, PORTUGAL, 2013.
  • Aydogdu, M, Paraoglu, P, Secgin, S. Filiz S, Vibration and bending analysis of multi-walled carbon nanotubes Mechanics of Nano, Micro and Macro Composite Structures Politecnico di Torino, A. J. M. Ferreira, E. Carrera (Editors),18-20 June 2012.
  • Aksencer T, Aydogdu M. Thermal buckling analysis of nanoplates using Levy type solution, Mechanics of Nano, Micro and Macro Composite Structures Politecnico di Torino, A. J. M. Ferreira, E. Carrera (Editors),18-20 June 2012.
  • Aydogdu M., Aksencer T. Dynamic interlaminar stresses in a vibrating laminated composite plate, Mechanics of Nano, Micro and Macro Composite Structures Politecnico di Torino, A. J. M. Ferreira, E. Carrera (Editors),18-20 June 2012.
  • Eruslu S.Ö., Aydogdu M., Filiz S. Thermal buckling analysis of short fiber reinforced laminated plates Mechanics of Nano, Micro and Macro Composite Structures Politecnico di Torino, A. J. M. Ferreira, E. Carrera (Editors),18-20 June 2012.
  • Uymaz, B, Aydogdu M. Three dimensional shear buckling of FG plates with various boundary conditions, Mechanics of Nano, Micro and Macro Composite Structures Politecnico di Torino, A. J. M. Ferreira, E. Carrera (Editors),18-20 June 2012.
  • Demirhan P, Aydogdu M, Taksin V, Taskin N. Nonlinear bending analysis of bi-modulus cantilever functionally graded beams. ICCS, 16, Portugal, 2011,June.
  • Uymaz B, Aydogdu M, Filiz S Vibration analysis of functionaly graded plates. ICCS, 16, Portugal, 2011,June.
  • Filiz S, Aydogdu M, Vibration analysis of bi-material timoshenko beams. ICCS 16, portugal, 2011,June.
  • Aydogdu M, Filiz S, Vibration analysis of laminated composite plates with attached mass. ICCS 16, portugal, 2011,June.
  • Aksencer T, Aydogdu M, Bending of nanoplates using non-local elasticity, ICCS 16, portugal, 2011,June.
  • Filiz S., Aydogdu M.; Continuum buckling analysis of Double-Walled Carbon Nanotubes with different iner and outer boundary conditions, &th, Nanoscience and Nanotechnology Conference, NanoTR6, İzmir,2010.
  • Aydogdu M, Karaoglu P., Secgin S, Buckling analysis of double-walled carbon nanotubes embedded in an elastic medium, Istanbul Technical University, Turkey, NanoTR4, 2008.
  • Taksin V, Urkmez N, Karacam F, Aydogdu M., Buckling of functionally graded plates, Unitech, Gabrova, Bulgaria, 2007 .
  • Uymaz B., Aydogdu M., Vibration analysis of functionally graded plates with simply supported edge condition, 4th International Aerospace Conference, 10-12 September, METU, Ankara, 2007.
  • Eruslu O, Aydogdu M. Mechanical and vibration analysis of Al/SiC composite plates., 4th International Aerospace Conference, 10-12 10-12 September, METU,Ankara, 2007.
  • Aydogdu, M., V. Taskin, “Vibration Analysis of Functionally Graded Simply Supported Beams,” Proc. 7th Int. Conference on Vibration Problems, Işık University, Şile-İstanbul, 2005.
  • Aydogdu, M., T. Tımarcı, “Buckling and vibration analysis of laminated composite plates on the basis of a higher order plate theory,” Proceedings of ECCM European Conference on Computational Mechanics, Cracow, Poland, 2001.
  • Forced vibration of Nanorods using nonlocal elasticity

Uluslararası Konferans ve Sempozyumlar

  • Mustafa Arda, Metin Aydogdu,Analysis Free Torsional Vibration in Carbon Nanotubes Embedded in a Viscoelastic Medium, 6th International Advance in Manufacturing and Machine Designing Symposium (MSN2015)

Yazılan Uluslararası Kitaplar veya Kitaplarda Bölümler

  • Aydogdu M., Filiz S, Vibration Analysis of Piecewise and Continuously Axially Graded Rods and Beams, in Mechanical Vibrations: Types, Testing and Analysis, Editors: Amy L. Galloway, 2011.Nova publishers.

Ulusal Hakemli Dergilerde Yayınlanan Makaleler

  • Aydoğdu, M. ve T. Tımarcı, “Buckling and vibration of in-plane loaded symmetric composite rectangular plates”, Trakya University Journal of Science, 5, 167-177 (2004).

Ulusal Bilimsel Toplantılarda Sunulan ve Bildiri Kitabında Basılan Bildiriler

  • Bahar Uymaz, Metin Aydoğdu, Çift duvarlı karbon nanotüplerde dalga yayılımı, UMTS 2013, Erzurum.
  • Aksencer T, Aydogdu M., Forced vibration amalysis of nanoplates, UMST-2011, Proceedings of 15. National Symposium on Theory of Machines, Niğde.
  • Eruslu, O., Aydoğdu, M., Filiz, S. Vibration analysis og short fiber reinforced composite beams, UHUK 2010, Eskişehir.
  • Uymaz B., Aydoğdu,M., Vibration analysis of functionally graded beams. UHUK, 2010, Eskişehir.
  • Aydoğdu, M., Filiz S. Vibration of axially loaded functionally graded cylindrical shells., UHUK, 2010, Eskişehir.
  • Filiz S., Aydoğdu M., Vibration analysis of axially graded beams, UMST-2009, Proceedings of 14. National Symposium on Theory of Machines, 1-6, KKTC.
  • Aksencer T., Aydoğdu M., Vibration analysis of nano plates using nonlocal elasticity, UMST-2009, Proceedings of 14. National Symposium on Theory of Machines, 1-6, KKTC.
  • Aydoğdu M., Katmanlı kompozit plaklar için yeni bir kayma deformasyon teorisi, XVI. Ulusal Mekanik Kongresi, 22-26 Haziran, Kayseri, 2009
  • Aydoğdu M.,” Free vibration of multiwalled carbon nanotubes” XV.National Mechanics congress, 3-7 September, Isparta, 2007.
  • Aydoğdu, M., “Buckling of cross-ply laminated simply supported composite beams”, First National Aerospace Conference, 21-23 September, Ankara, 2006.
  • Eruslu Ö., Aydoğdu, M., “Vibration of short fiber reinforced composite plates” First National Aerospace Conference, 21-23 September, Ankara, 2006.
  • Aydoğdu, M., “Three dimensional vibration analysis of composite plates by Ritz method.”, XIV. National Mechanic congress, 17-25, Antakya, 2005.
  • Aydoğdu, M., “Vibration of composite beams at least one free edge.”, XIV. National Mechanics congress, 17-25, Antakya, 2005.
  • Aydoğdu M, Ayvaçiçeği B, Eruslu Ö,”Vibration of simply supported cross-ply composite beams”,Hitek-2004, Advanced Technologies and Applications Symposium in Aeronautics, 1, 55-58, İstanbul, 2004.
  • Aydoğdu M, Tımarcı T ”Vibration analysis of laminated composite plates by a higher order plate theory” UMST-2001, Proceedings of 10. National Symposium on Theory of Machines, 1, 126-135, Konya, 2001
  • Aydoğdu M, Tımarcı T, “Buckling analysis of laminated rectangular composite plates by a higher order plate theory ” Proceedings of 12. National Mechanics Congresi, 129-138, Konya, 2001.
  • Akata,H.E.; Altınbalık,M.T.; Aydoğdu, M.;” Optimisation of Manufacturing methods in gear blanks production”, Materials 2000, Proceedings of 8. National Material Congress, 26-28 April, 80-84, 2000.

Ulusal Konferans ve Sempozyumlar

  • ARDA, M., AYDOĞDU, M., "Silindirik Kabuk Yapıların Burulmalı Titreşim Davranışının İncelenmesi", 17. Ulusal Makine Teorisi Sempozyumu (UMTS2015), 14-17 Haziran 2015, İzmir. (Haziran 2015)

Yönetilen Doktora Tezleri

  • Arda M., (2016). Nano Ölçekli Yapılarda Burulma Davranışının Yerel Olmayan Elastisite Teorisi Kullanılarak Statik ve Dinamik Analizi
  • Eruslu SO., Vibration Analysis of Inclusion Reinforced Composite Square Plates under various Boundary Conditions, Phd. Thesis, 2008. -Assistant Prof. At the Namik Kemal Uni.
  • Uymaz B., Three Dimensional Free Vibration Analysis of Functionally Grdaed Plates, Phd. Thesis, 2007. (Mansion in Best PhD Thesis Award from Turkish Community of Theoretical and Applied Mechanics)-Assistant Prof. At the Namik Kemal Uni.

Yönetilen Yüksek Lisans Tezleri

  • Buket Erkuş, Theoretical and experimental thermal bending analysis of glass strips. (with Dr.Taskin), 2012
  • Korucuoglu, V. Motion of a particle in a resistive medium, Ms.Thesis,2011
  • Karaoglu, P. Vibration analysis of carbon nanotubes using continuum beam models, 4, April, 2011.
  • Seçgin, S. Static analysis of carbon nanotubes using continuum beam models, Ms., Thesis, 2010
  • Filiz S., Free vibration analysis of axially graded bars and beams, Ms., Thesis, 2010. Reader at The Namik Kemal Un.
  • Aksencer T, Dynamic and static analysis of nano plates using nonlocal elasticity, Ms., Thesis, 2010.-Research Asistant at the Trakya Un.

Editörlük / Yayınlama

  • The Scientific World Journal (SCI-E)
  • Advances in Nano Research (ANR)
  • Usak University Journal of Material Sciences
  • Member of Editorial board. International Journal of Engineering and Applied Sciences (IJEAS)
  • Scientific board member of conferences composite science

Yapılan Hakemlikler

  • Journal of Physics and Chemistry of Solids (1) (Nisan 2015)
  • Ocean Engineering (2)
  • Journal of Sound and Vibration (17)
  • Composite structures (70) (Ocak 2014)
  • Mechanical Systems and Signal Processing
  • International Journal of Mechanics and Materials in Design
  • Science and engineering of composite materials
  • Mechanics of Advanced Materials and Structures (5)
  • Proceedings of Mechanical Engineering Science-Part C
  • Modern Physics Letters B (1)
  • Journal of Zhejing University A-Sciene (2)
  • International Journal of Applied Mechanics
  • International Journal of nanoscience and nanotechnology (1)
  • International Journal of Nanoscience (2)
  • Mechanics Research Communications
  • Journal of Engineering Mathematics (1)
  • Sensors and Actuators
  • Science and Engineering of Composite materials
  • Physics Letters A
  • International Journal of Mechanical Sciences
  • Gazi üniversitesi müh.mim.fak Journal
  • Nonlinear Mechanics
  • Composites Part B
  • Tecno-steels and composites
  • Journal of vibration and control
  • Applied Mathematics
  • Acta Mechanica Snica
  • MATİM Makina Tasarım ve İmalat Dergisi
  • Korean journal
  • International journal for numerical methods in biomedical engineering,
  • Indian Journal of Engineering & Materials Sciences (IJEMS)
  • Ocean Engineering
  • Physica-E
  • Meccanica
  • Journal of Composite Materials
  • International Journal for Computational Methods in Engineering
  • KSCE Journal of Civil Engineering
  • Multidisciplin Modelling in Materials and Structures (MMMS)
  • Computer methods in Applied Mechanics
  • Sigma yıldız teknik üniversitesi
  • Structural Mechanics
  • European Journal of Mechanics A/ Solids
  • International Journal of Solids and Structures